Operating instructions

Kaleido-X16
Quick Start Guide
13
3. Right-click anywhere on the monitor wall, point to Monitor Wall, then click System configuration.
The System Configuration window appears.
4. Click the Ethernet tab.
5. Type the required Frame IP address, network mask, and gateway address in the appropriate fields.
6. Click OK.
A Restart Warning dialog box appears asking if you would like to restart the system to commit
configuration changes.
7. Click Yes.
Configuring a Client PC
The client PC that you will use to communicate with the Kaleido-X16 (via XAdmin and XEdit) and the
Kaleido-X16 itself must have IP addresses within the same subnet.
Changing a Client PC’s IP Address
To change the IP address of the client PC, do the following:
1. On the Windows XP Start menu, point to Control Panel, right-click Network Connections, then click
Open on the shortcut menu.
2. In Network Connections, right-click Local Area Connection, then click Properties on the shortcut
menu.
3. In Local Area connection Properties, select Internet Protocol (TCP/IP) from the list on the General
tab, then click Properties.