Operating instructions

Kaleido-X16

Quick Start Guide

c ) If you would like the system to automatically select a resolution based on information from the

connected display, select Use detected monitor resolution.

d ) If you would like to manually set (and fix) the resolution, select the desired resolution from the

Default DVI resolution list:

e ) Click OK.

The output resolution is adjusted accordingly.

Step 2: Networking Setup

For the Kaleido-X16 unit to join a TCP/IP network, it must be configured with an IP address, a network

mask, a gateway, and a system name. In addition, a client PC must be configured to communicate with the

Kaleido-X16. You must also configure the Kaleido-RCP2 unit, and any Audio Bridge Terminal unit you may

have ordered.

There are two possible configuration states for Kaleido-X16 systems as shipped:

Scenario A: If your organization had requested a specific IP configuration from Miranda, it would have been

assigned prior to shipment. A configuration document, describing the IP address assignments for the

frame and other system devices, would be included in the shipment.

Scenario B: The Kaleido-X16 is shipped with default settings: