Operating instructions

7
Kaleido-X16
Quick Start Guide
Changing the Output Resolution
To change a display’s resolution from the monitor wall
1 Connect a mouse to one of the USB connectors of the Kaleido-X16.
2 Right-click anywhere on the monitor wall, point to Monitor wall (if you clicked a
monitor), and then click Display resolution:
The Display Resolution window appears:
LED LED Status
Green
Blinking
green
Red Blinking red Yellow
Blinking
yellow
Off
CPU Normal
operation
Application
booting
Error Live Update OS Booting N/A Front cover is
closed
CPF Activity N/A Activity N/A N/A N/A N/A No Activity
Video Inputs Inputs are
locked
N/A Inputs are
unlocked, or
no input
ERROR ON
SIGNAL
N/A N/A Front cover is
closed
DVI Inputs Inputs are
locked
N/A Inputs are
unlocked, or
no input
ERROR ON
SIGNAL
N/A N/A Front cover is
closed
LTC LTC valid N/A No signal N/A N/A N/A Front cover is
closed
Ref. Input Input is
locked
N/A Input is
unlocked, or
no input
ERROR ON
SIGNAL
N/A N/A Front cover is
closed
SDTI Inputs are
locked
N/A Inputs are
unlocked, or
no input, or
no SDTI signal
ERROR ON
SIGNAL
N/A N/A Front cover is
closed
Gen. Status System OK Intrusive self-
diagnostic
finished
Configuration
Failed, Safe
Mode
Firmware
Upgrading
Boot up
Diagnostic
(Verbose
switch on)
Firmware
error
Front cover is
closed
Severity Boot OK Booting Boot error,
Need live-
update
Fatal error,
CALL TECH
SUPPORT
N/A N/A No power