Installation manual

Kaleido-X16
Hardware Description & Installation Manual
33
Kaleido-RCP2 Configuration menu summary
Selecting a Room
Use the Configuration menu to select the room you wish to access with your RCP2—the ON AIR room, for
example. Once you select the room, you can log on as a specific user, corresponding to one of the login
positions that are available for this room only. In the example described below, the three rooms that are
available, are listed in this sequence: RMA, RMB, RMC. We will select room RMC.
2 Move UP
8Move DOWN
ENTER Access the submenu, or select the displayed value
ESC Go back to the previous menu level, or cancel a value selection
Note: These keys are lit when menu access is enabled.
Display the firmware version
Display the current IP address
Display the current subnet mask
Display the current gateway address