Installation manual

29
Kaleido-X16
Hardware Description & Installation Manual
The Kaleido-X16 supports 32 GPI inputs and 4 GPI outputs, on a DB-44 female connector.
Frame
GPI INPUT (up to 32)
Description Contact closure to GND
Pull-up voltage 3.3 Volts
Source current 30 μA when input shorted
Low-level activation 0.8 Volts max
Over voltage 24 Volts max
Connector DB-44
GPI OUTPUT (up to 4)
Description Contact closure to GND
Signal Open collector 5 to 12 VDC
Contact closure current 50 mA max
Reverse voltage -15 Volts max
Reverse current -50 mA max
V out low 0.6 Volts at 1.5mA
Connector DB-44
Ethernet
Signal 10/100 BASE-T (IEEE 802.3)
Connector RJ-45
RS-422
Signal RS-422 (SMPTE ST 207, EBU-3245)
Connector RJ-45
USB
Signal USB Version 1.0
Connector USB
Power supply Hot-swappable redundant power supply
Input voltage 100-240 V
Frequency 47.63 Hz
Power 300 W @ 75% of PSU