Installation manual

25
Kaleido-X16
Hardware Description & Installation Manual
Outputs
Mosaic Outputs
The Kaleido-X16 frame supports two HDMI outputs.
The following table lists some (but not all) output formats supported on the HDMI
connection.
H frequency 37 kHz to 96 kHz
Refresh rate 50/59.94 Hz
Cable length 3.6 m (12 ft) with Altinex CB4012DV
Connector DVI-I (dual link)
HDMI Outputs
Signal DVI-D
Resolution From 1024 × 768 to 1920 × 1200 NI
H frequency 37 kHz to 96 kHz
Refresh rate 50/59.94 Hz
Cable length 5 m (15 ft)
1
1.Depending on the selected output resolution, on your display monitor’s tolerance, and on the
quality of the HDMI cable itself, a longer cable could be used, as long as the signal integrity is
maintained between the multiviewer, and the display monitor. For example, with a 1080p output
resolution, longer high-speed HDMI cables may require an HDMI booster.
Connector HDMI
Supported cable types HDMI to HDMI, or HDMI to DVI-D
Resolution Format name Refresh rates (Hz)
1024 × 768 XGA 50.00, 59.94
1280 × 720 Margay 50.00, 59.94
1280 × 768 WXGA 50.00, 59.94
1280 × 1024 SXGA 50.00, 59.94
1280 × 1024 Barco 59.94
1360 × 768 NEC 50.00, 59.94
1480 × 1200 Christie 50.00, 59.94
1600 × 1200 UXGA 50.00, 59.94
1920 × 1080 Baycat 50.00, 59.94
1920 × 1200 WUXGA 50.00, 59.94