Installation manual

15
Kaleido-X16
Hardware Description & Installation Manual
Audio I/O TBA Pinout on the Kaleido-X16-D
The Audio I/O TBA pinout on the Kaleido-X16-D is as follows:
Audio I/O TBA Pinout on the Kaleido-X16-S
The Audio I/O TBA pinout on the Kaleido-X16-S is as follows:
For more information about:
• SDTI audio specifications, see SDTI Audio Input, on page 28.
• analog audio specifications, see Analog Audio Output, on page 28.
• AES output specifications, see AES Outputs, on page 28.
• triggering audio monitoring, see “Triggering Audio Monitoring” in the Operation of the
Monitor Wall chapter of the Kaleido-X User’s Manual.
• calibrating audio monitoring delay, see “Calibrating the Audio Monitoring Delay” in the
Calibrating the Kaleido-X chapter of the Kaleido-X User’s Manual.
• calibrating audio monitoring color, see “Calibrating the Audio Monitoring Color” in the
Calibrating the Kaleido-X chapter of the Kaleido-X User’s Manual.
Bottom row Center row Top row
19 GND 10 AES Out 1 (+) 1 AES Out 1 (-)
20 GND 11 AES Out 2 (+) 2 AES Out 2 (-)
21 GND 12 GND 3 GND
22 GND 13 Analog Left Out 1 (+) 4 Analog Left Out 1 (-)
23 GND 14 Analog Right Out 1 (+) 5 Analog Right Out 1 (-)
24 GND 15 Analog Left Out 2 (+) 6 Analog Left Out 2 (-)
25 GND 16 Analog Right Out 2 (+) 7 Analog Right Out 2 (-)
26 GND 17 PC In 1 Left (not supported) 8 PC In 1 Right (not supported)
18 PC In 2 Left (not supported) 9 PC In 2 Right (not supported)
Bottom row Center row Top row
19 GND 10 AES 1 (+) 1 AES 1 (-)
20 GND 11 NC 2 NC
21 GND 12 GND 3 GND
22 GND 13 Analog Left Out 1 (+) 4 Analog Left Out 1 (-)
23 GND 14 Analog Right Out 1 (+) 5 Analog Right Out 1 (-)
24 GND 15 NC 6 NC
25 GND 16 NC 7 NC
26 GND 17 PC In 1 Left (not supported) 8 PC In 1 Right (not supported)
18 NC 9 NC