User`s manual

Checklist
73
6. Click Apply All to apply the desired Zero VU dBFS and Zero VU dBu values throughout the system.
7. Click File|Save or the Save tab in the XEdit application toolbar.
Calibrating Router Field Selection Switching
To calibrate router field selection switching:
1. Repeat steps 1 and 3of the Configuring Calibration instruction set.
2. Select the KXO-24 Router|Output1|Switch Field Selection.
The Switch Field Selection appears.
Router Field Selection Switching selection
3. Select Calibration|Switch Field Selection under the Properties panel on the far right.
4. Select the appropriate Field.
The Field selection appears.
Kaleido-X User's Manual.book Page 73 Friday, August 24, 2007 4:39 PM