User`s manual

72
Creating Layouts
3
KXI-16HSV ABT Zero VU dBFS Value selection
6. Click Apply All to apply the desired Zero VU dBFS value throughout the system.
7. Click File|Save or the Save tab in the XEdit application toolbar.
Calibrating the KXI 16HSV ABT Zero VU Audio Source
To calibrate an ABT audio source:
1. Repeat the first 4 steps of the Configuring Calibration instruction set.
2. Select the Zero VU of either the embedded audio of the input ABT audio.
ABT Right Zero VU Audio Selection
3. Click on the Zero VU leaf node under the KXI-HSV16.
4. Click on the Properties panel.
5. Click on the Zero VU slider under Calibration and move it from left to right to select the desired Zero VU
dBFS and the Zero VU dBu value.
KXI-16HSV ABT Zero VU dBFS Value selection
Kaleido-X User's Manual.book Page 72 Friday, August 24, 2007 4:39 PM