User`s manual

70
Creating Layouts
3
4. Connect it to the Kaleido-X by left-clicking and dragging the mouse from Serial Port Test to the
Kaleido-X frame.
5. Select the output from the Properties|Connections|RS-422 Com Port on the far right.
When connected, the Serial Port Test agent will log all data received from the serial port to a file
accessible using a web browser.
After an export, the serial test agent is started. The agent opens the serial port and start dumping any
data received to a file available at http://
CARD_IP_Address /logs/comm.log.
Note: The
CARD_IP _Address is the IP address of the card where the Serial Port Test is connected. The
IP Address is located in XAdmin.
Configuring Calibration
To configure calibration:
1. Select the System tab from the XEdit main window center pane.
2. Select Configure|Calibration|Connect if the user wants to apply the calibration changes in real-time.
If the connection succeeds, "Connected to IP_ADDRESS” will appear in the application title bar.
If Step 2 is omitted, then the user will need to export the database to apply the calibration changes.
3. Select and change from Default Filter to Calibration Filter at the top left of the XEdit main window.
Calibration Filter selection
4. Expand the System tree and select one of the System tree leaf node.
5. Use the Properties panel to edit the calibrations associated with currently selected tree leaf node.
Kaleido-X User's Manual.book Page 70 Friday, August 24, 2007 4:39 PM