User`s manual

Checklist
69
Kaleido-X FR4 system
3. Click File|Save or the Save tab in the XEdit application toolbar.
Kaleido-X FR4 Factory Defaults
Serial Port Test 3rd Party Device
During a setup, it is not clear if the wiring between the Kaleido-X and a 3rd party is correct or if the 3rd
sends expected data. One can connect a serial port test agent via XEdit, export the database and then read,
via a web page, the data received on the serial port.
To use a serial port test 3rd party device:
1. Drag and drop Serial Port Test into the center pane’s highlighted System or Right-Click on System.
2. Select Serial Port Test from the appearing menu.
Serial Port Test appears in the center pane’s System tree.
3. Click on the Interconnect tab in the center pane.
Channels Rooms Layouts RCP2
32 2 4 1
Kaleido-X User's Manual.book Page 69 Friday, August 24, 2007 4:39 PM