User`s manual

22
Overview
1
4. Check the status of the Kaleido-X frame to make sure that there are no errors or alerts related to:
• system temperature
• fan operation
• card fault conditions
The main system statuses are reported by the KXA-GPI-GEN card (the first in the list). The subsequent
statuses—especially the ones listed in the table below—should all be normal, although if you left the
door open when checking the card LEDs, you may see a warning under “Chassis door open status”.
To verify that the RCP2 is functioning normally, do the following:
1. Log onto the RCP2.
2. Test various operations with the RCP2 and the mouse (e.g. load layout presets).
KXA-GPI-GEN - 1.2V Status
KXA-GPI-GEN - 1.8V Status
KXA-GPI-GEN - 2.5V Status
KXA-GPI-GEN - 3.3V Status
KXA-GPI-GEN - 48V Power Supply A Fuse Status
KXA-GPI-GEN - 48V Power Supply B Fuse Status
KXA-GPI-GEN - Board High Temperature
KXA-GPI-GEN - Chassis Door Open Status
KXA-GPI-GEN - Power Supply A Status
KXA-GPI-GEN - Power Supply B Status
KXA-GPI-GEN - Rear Fan 1 Status
KXA-GPI-GEN - Rear Fan 2 Status
KXA-GPI-GEN - Rear Fan 3 Status
KXA-GPI-GEN - Rear Fan 4 Status
KXA-GPI-GEN - Rear Fan 5 Status
KXA-GPI-GEN - Rear Fan 6 Status
Kaleido-X User's Manual.book Page 22 Friday, August 24, 2007 4:39 PM