User`s manual

Step 4 – XEdit Installation

Kaleido-X Layout Editor (XEdit) is used to create layouts and configure the Kaleido-X. When the computer

running XEdit is connected to the Kaleido-X through a TCP/IP network, XEdit can export the Layouts to the

Kaleido-X.

To install the XEdit software, do the following:

1. Verify that the Client PC on which you are about to install XEdit meets the minimum hardware

requirements.

2. Verify that the Client IP address is in the same subnet as the IP address configured for the Kaleido-X

(refer to “Configuring a Client PC” on page 10).

3. If there is a previous version of XEdit already installed, you should uninstall it by choosing

Start > All Programs > Miranda -> XEdit 2.00 > Uninstall XEdit 2.00

4. Insert the XEdit installation DVD into the PC.

5. Double-click on the Install_XEdit_2_00.exe installer file to start the installer application.

The installer application launches, and the Introduction screen appears. Press NEXT.

The Pre-Installation Summary screen appears.

6. Press INSTALL.

Note: During installation, you may be asked for permission to overwrite font files (e.g. WIDEA__.TTF).

After a few moments, the Install Complete screen appears.

7. Press DONE.

Once the XEdit installation procedure is completed, an XEdit 2.00 icon will appear on the PC desktop,

and the Microsoft Windows Program menu will be updated to include a Miranda -> XEdit 2.00 folder.

Note: Refer to the XEdit User Guide for information on how to create layouts.

Kaleido-X User's Manual.book Page 19 Friday, August 24, 2007 4:39 PM