User`s manual

Overview

Step 3 – Select Default Layouts

If your system was configured prior to shipment, then the designated layout will show up on all displays.

Otherwise, a gray screen will appear with the following message in the middle:

“No layout has been assigned to this room. Please load a layout.”

To select a default layout, do the following:

1. Connect a mouse to the RCP2.

2. If you have not already done so, log in to the Kaleido-X from the RCP2 (see “RCP2 Login” on page 13)

3. Press the Right-Click and from the Right-Click menu select the Load layout.

A layout browser appears on the display(s) associated with the current ROOM. By default, each ROOM

is associated with one output card. Each default layout is pre-configured to show 16 video streams for

each input card.

Example of a default layout showing 16 video streams

4. Choose a default layout from the layout browser.

The video source should appear on the ROOM display(s).

Note: You can also use the first 6 LAYOUT PRESET buttons on the RCP2 to select a default layout.

Kaleido-X User's Manual.book Page 18 Friday, August 24, 2007 4:39 PM