User`s manual

15
RCP2 Login
As a network device, the RCP2 provides access to any ROOM configuration on any Kaleido-X system on the
network. As a security measure, access is controlled by a login procedure.
To log in to a Kaleido-X system from the RCP2, do the following:
1. Press the LOGIN key.
The LCD on the RCP2 will display the following message:
LOGIN Position
Admin
2. Press ENTER to select Admin.
The LCD on the RCP2 will prompt you to enter a password.
3. Press ENTER again (by default, there is no password).
The LCD will display the message “Access granted” if the login was successful. If a mouse is connected
to the RCP2, then you should be able to see and move the mouse pointer on the Monitor Wall.
Note: If at any time the LCD displays the message “Target system is offline” or “No login list available”, press
the ESC, ENTER and DELETE keys simultaneously and go back to Step 1.
For more information, please refer to the Kaleido-RCP2 User’s Manual, available on the DVD-ROM that
shipped with your system.
Kaleido-X User's Manual.book Page 15 Friday, August 24, 2007 4:39 PM