User`s manual

6. Click OK to apply these settings.

7. In the Local Area Connection Properties window, click OK.

To change the IP address of the Kaleido-X system, do the following:

1. Configure your Client PC with an IP address in the same range as the IP address of the Kaleido-X.

See “Configuring a Client PC” on page 10.

2. Open a web browser and type the following:

http://AAA.BBB.C.DDD/

where AAA.BBB.C.DDD is the Frame IP address of the Kaleido-X.

Example:

http://10.0.3.70/

A login screen appears.

3. Type “admin” in the User Name field. Leave the password field blank, and press Enter.

The XAdmin welcome page appears.

XAdmin Main page

4. From the XAdmin welcome page, select Setup | Ethernet.

The XAdmin Setup > Ethernet page appears, showing the current system name, IP address, network

mask, gateway and output cards IP addresses.

Kaleido-X User's Manual.book Page 11 Friday, August 24, 2007 4:39 PM