User`s manual

10
Overview
1
Configuring a Client PC
The IP address of the Client PC that you will use to communicate with the Kaleido-X (via XAdmin and XEdit)
must have an address that matches the subnet of the Kaleido-X IP address.
To change the IP address of the Client PC, do the following:
1. From the Windows XP Start menu, select Settings|Control Panel | Network Connections and Local Area
Connection.
2. From the File Properties menu, select Internet Protocol (TCP/IP), and then select Properties.
Configuring IP settings on a PC running Windows.
3. Under the General tab, click “Use the following IP address”.
4. Type an IP address in the same range as the default Frame IP address of the Kaleido-X. For example,
the Kaleido-X uses the default Frame IP address of 10.0.3.70, (if in doubt, contact your network
administrator).
5. Type a subnet mask in the same range as that of the Kaleido-X.
Kaleido-X User's Manual.book Page 10 Friday, August 24, 2007 4:39 PM