User`s manual

8
Overview
1
Step 2 – Networking Setup
In order for the Kaleido-X unit to be able to join a TCP/IP network, it must be configured with an IP address,
a network mask, a gateway, and system name. In addition, a client PC must be configured to be able to
communicate with the Kaleido-X. You must also configure the Kaleido-RCP2 unit.
Configuring the Kaleido-X
There are two possible configuration states for Kaleido-X systems as shipped:
Scenario A: If your organization had requested a specific IP configuration from Miranda, it would have been
assigned prior to shipment. A configuration document, describing the IP address assignment of the frame
and other system device, would be included in the shipment.
Scenario B: The Kaleido-X is shipped with default settings:
Frame IP Address = 10.0.3.70
Netmask = 255.255.0.0
Gateway = 10.0.0.1
Output A = 10.0.3.66
Output B =10.0.3.67
Output C =10.0.3.68
Output D =10.0.3.69
Kaleido-X User's Manual.book Page 8 Friday, August 24, 2007 4:39 PM