User`s manual

104
Creating Layouts
3
Width presets
3. Enter the preferred Width values.
4. Select the desired unit of measurement located on the far right of the Width field.
The Width value is displayed within the field.
The pull-down menu offers the choice of millimeters (mm) or inches (inch).
Selected Width values and units
Changing a Room Display Rotation
Note: The KXS-ROTATOR option must be enabled on the KXO-DUAL card for rotation to work properly on
the Monitor Wall. The option can be installed and verified via XAdmin.
To change a room display rotation:
1. Repeat the steps 1, 2 and 3 of the Selecting Room Display Attributes section.
2. Select the Rotation properties on the far right.
The Rotation presets appears.
Kaleido-X User's Manual.book Page 104 Friday, August 24, 2007 4:39 PM