User`s manual

Checklist
87
7. Changing Room Display Resolution. Refer to “Changing Room Display Resolution” on page 93
8. Changing the Aspect Ratio. Refer to “Changing the Aspect Ratio” on page 104
9. Changing the Diagonal Size. Refer to “Changing the Diagonal Size” on page 95
10. Changing the Height. Refer to “Changing the Height” on page 95
11. Changing the Width. Refer to “Changing the Width” on page 96
12. Changing a Room Display Rotation. Refer to “Changing a Room Display Rotation” on page 97
13. Changing the Room Display Position. Refer to “Changing the Room Display Position” on page 98
Key Concepts
Room
A room is a visual grouping of displays that are meant to be used by one or multiple operators that are
sharing the same room. The grouping of display creates a large virtual monitor wall that can will be seen
as a single large display from an operator point of view. In this section, display resolution and size will be
configured as well as user's zones that are used to display the full screen window.
Fullscreen Zone
A fullscreen zone is a sub-section of the entire room. It can be any size and it can be positioned on any of
the displays in the room. The fullscreen zone is an area of the monitor wall that is reserved for the specific
user it is assigned to. A fullscreen zone can be associated with one or more fullscreen layouts.
Display Library
A display library contains a collection of predefined displays. Displays from a library can be used to help
construct a room. More than one display library can exist.
What is a room?
What is a fullscreen zone?
What is a display library?
Kaleido-X User's Manual.book Page 87 Friday, August 24, 2007 4:39 PM