Installation manual
Table Of Contents
- 1 Kaleido-Alto & Kaleido-Quad
- 2 Installation
- 2.1 Unpacking
- 2.2 Mechanical Installation
- 2.3 Power Connection
- 2.4 Signal and Control Connections
- 2.4.1 HD-SDI Video Inputs
- 2.4.2 SD-SDI Video Inputs
- 2.4.3 Composite Video Inputs
- 2.4.4 DVI Input
- 2.4.5 DVI Resolutions Supported with a KXI-DVI-Bridge Connected to the Kaleido’s HD-SDI Input
- 2.4.6 Analog Audio Inputs (Optional Alto-SA Mezzanine with 10 or 4 Inputs)
- 2.4.7 Digital Audio Input (Optional Alto-AES Mezzanine)
- 2.4.8 PC Audio Input
- 2.4.9 Component Analog (RGBHV) Output
- 2.4.10 DVI Output
- 2.4.11 Audio Monitoring Output
- 2.4.12 GPI Inputs /Outputs
- 2.4.13 Ethernet
- 2.4.14 USB
- 2.5 Dual power supplies (Optional)
- 2.6 Multiple Kaleido-Alto/Quad Installations
- 3 Operation
- 4 Technical Specifications
- Annex – Kaleido Display Resolution
- Contact Us!
Installation Manual
Safety Compliance Information
Safety Compliance
This equipment complies with:
- CSA C22.2 No. 60950-1-03 / Safety of Information Technology Equipment, Including Electrical Business Equipment.
- UL 60950-1 (1
st
Edition) / Safety of Information Technology Equipment, Including Electrical Business Equipment.
- IEC 60950-1 (1
st
Edition) Incorporating A1, A2, A3, A4, and A11/ Safety of Information Technology Equipment, Including
Electrical Business Equipment.
CAUTION
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not
perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Refer all
servicing to qualified service personnel. Servicing should be done in a static-free environment.
Kaleido-Alto & Kaleido-Quad