Installation manual
Table Of Contents
- 1 Kaleido-Alto & Kaleido-Quad
- 2 Installation
- 2.1 Unpacking
- 2.2 Mechanical Installation
- 2.3 Power Connection
- 2.4 Signal and Control Connections
- 2.4.1 HD-SDI Video Inputs
- 2.4.2 SD-SDI Video Inputs
- 2.4.3 Composite Video Inputs
- 2.4.4 DVI Input
- 2.4.5 DVI Resolutions Supported with a KXI-DVI-Bridge Connected to the Kaleido’s HD-SDI Input
- 2.4.6 Analog Audio Inputs (Optional Alto-SA Mezzanine with 10 or 4 Inputs)
- 2.4.7 Digital Audio Input (Optional Alto-AES Mezzanine)
- 2.4.8 PC Audio Input
- 2.4.9 Component Analog (RGBHV) Output
- 2.4.10 DVI Output
- 2.4.11 Audio Monitoring Output
- 2.4.12 GPI Inputs /Outputs
- 2.4.13 Ethernet
- 2.4.14 USB
- 2.5 Dual power supplies (Optional)
- 2.6 Multiple Kaleido-Alto/Quad Installations
- 3 Operation
- 4 Technical Specifications
- Annex – Kaleido Display Resolution
- Contact Us!
Installation Manual
2.4.11 Audio Monitoring Output
A DE-15P connector is provided to monitor one stereo audio channel, in both balanced AES3 and analog
formats. Refer to figure 2.4.8 for connector pinout.
Figure 2.4.8 Audio monitoring connector pinout
2.4.12 GPI Inputs /Outputs
The GPI input connector provides interfaces and processing to support 20 contact closure tally inputs and
provisions to support 10 outputs using DB-44S connectors. The connector pinout and circuit schematics are
shown in figure 2.4.9 and 2.4.10 below.
To facilitate cabling of the GPI inputs and outputs, a terminal block adapter is available separately (Alto-TBA-
AG). A double-sided Lexan plate is provided to identify the terminals assignment for both input and output
connectors. Place the Lexan plate as indicated in figure below, and install cables and plug the adapter into the
connector.
Figure 2.4.9 GPI Connector pinout
Kaleido-Alto & Kaleido-Quad | 11