Operating instructions

GUIDE TO INSTALLATION AND OPERATION
IRD-3802 | 29
Copy profile to section
This line shows other IRD-3802 cards that are available on the iControl network, each identified by App
server, Densité frame and slot number, card type and firmware version.
The Profile column shows the same information as is shown for the current card in the Copy profile from line,
i.e.
• Current, User1, User2, User3, User4, User5
The Select column includes a checkbox to identify which IRD-3802 cards you wish to copy profiles into from
the current card.
• For convenience, a Select all checkbox is provided in the column header
Click Copy to copy the selected profiles from this card into the selected other IRD-3802 cards
• While the profile copy operation is in progress, the Transfer Status box on the right of the Copy profile
to line will indicate Working against a yellow background
• When the profile copy operation is complete, the Transfer Status box on the right of the Copy profile to
line will indicate Succeeded against a green background
3.4.11 The Options panel
This panel provides an entry point for activating the five options available for the IRD-3802. Each option is
accessed on a separate tab.
Frame Sync option
This option provides frame synchronization of the
decoded signal to the external signal connected to
the REF IN connector on the rear panel.
To activate this option, you must:
• Obtain a licence key from Miranda
Technologies Inc.
• Type the licence key in the box
• Click on ENABLE OPTION to enable the
option’s features.
Figure 3.24 Options panel – Frame Sync