Operating instructions

GUIDE TO INSTALLATION AND OPERATION
22 | IRD-3802
• 625 from URS (Universal Reference Signal) – selects the internal reference (625) from the backplane
• Input – uses the currently-selected input signal.
The Used Reference box shows the reference currently in use, which is helpful in Auto mode
Vertical (lines)
With this adjustment, a value ranging from 0 to +200 lines, compared to the reference or the processing
delay, may be set. This adjustment can be used in conjunction with the horizontal timing adjustment.
Horizontal (μsec)
With this adjustment, a value ranging from zero to the equivalent of 1 horizontal line in the current operating
format (e.g. ranging from 0 to 63.46 µs for 525-line operation; 0 to 64.00 µs for 625-line operation; etc)
compared to the reference or the frame boundary, may be set.
Additional Frame Delay
Use the pulldown to select an extra frame delay to be added to the output.
Choices: 0, 1, 2 or 3 frames
NOTE: if the output format is interlaced, only 1 frame can be added. In progressive 720p, up to 3 frames are
allowed.
3.4.7 The Probing panel
Structure tab
Shows the structure of the transport stream
Figure 3.13 Probing panel – Structure tab