User manual

Automation Protocol Table of Contents
Miranda Technologies Ltd Page 8
STX0 / STX1-------------------------------------------------------------------27
ACK / NAK ---------------------------------------------------------------------28
Command Terminator -------------------------------------------------------28
Command Separator --------------------------------------------------------28
Status Responses ------------------------------------------------------------28
Unsolicited Messages (Tallies)--------------------------------------------29
TCP/IP-Based Automation 31
Serial Automation---------------------------------------------------------------31
Network Automation -----------------------------------------------------------31
Command List -----------------------------------------------------------------32
Status Response -------------------------------------------------------------32
Unsolicited Messages -------------------------------------------------------32
Command List 33
Video Commands---------------------------------------------------------------33
Audio Commands---------------------------------------------------------------33
Status Responses --------------------------------------------------------------33
Extended Commands and Responses ------------------------------------34
Video Commands 35
Layer Selections ----------------------------------------------------------------36
Swap Preview Mode ---------------------------------------------------------36
Cascade Mode ----------------------------------------------------------------36
Transition Commands ---------------------------------------------------------37
Fade to Black / Fade from Black 0-------------------------------------37
Fade Keyer Up / Fade Keyer Down 1---------------------------------37
Cut to Black / Cut from Black 2 -----------------------------------------38
Cut Keyer Up / Cut Keyer Down 3-------------------------------------38
Swap Preview and Main Image using Cut 6 ------------------------39
Swap Preview and Main Image using V-fade 7 --------------------39
Set Fader Angle @ -------------------------------------------------------39
Set Transition Duration B ------------------------------------------------40
Image Commands --------------------------------------------------------------41
Load Image from Library 8 ----------------------------------------------41