User manual

Automation Protocol Video Commands
Miranda Technologies Ltd Page 70
Once media tallies are enabled, unsolicited tallies are issued every time a
matching media file is added, deleted or modified.
The format of the YB tally response is as follows:
CMD Param_1 Param_2 Param_3
YB %06x Media Type (not bitwise)
As defined above
%1x
0x0 = Deleted
0x1 = Added
0x2 = Modified
%s
Media
File
Name
The first parameter reports the media file type. This can not be a bitwise
combination of media types since the tally is for a single media file.
The second parameter defines whether the image was added, deleted or
modified (over-written) within the file system.
The third parameter defines the media file name for which the change took
place.
Note: If media files are renamed then two tallies will be received; one
for the deletion, and one for the addition (or modification).
The status of the YB tallies for any port can be enquired using:
CMD
YB
This will return:
CMD Param_1
YB %06x Tally mask (bitwise) as defined above