User manual

Automation Protocol Video Commands
Miranda Technologies Ltd Page 64
For all Imagestore products except Imagestore Intuition, this “Y61”
command returns with:
CMD Param1 Param2 Param3 Param4 Param5 Param6 Param7
Y6 %1x
AB Mix
Position
%1x
DSK1
Keyer
Position
%1x
DSK 2
Keyer
Position
%1x
DSK 1
FTB
Position
%1x
DSK 2
FTB
Position
%02x
SQZ
Preset/
Seq. No
%02x
SQZ
Mode/
Router
Mode
Where the one hex digit format implies:
AB Mix Position DSK Keyer Positions DSK FTB Positions Value
MIXER_AT_A KEYER_OFF FTB_ON 0
MIXER_AT_B KEYER_ON FTB_OFF 1
MIXER_INBETWEEN KEYER_INBETWEEN FTB_INBETWEEN 2
Note: The Y6 command returns information on the first two keying
layers. Imagestore 750 keyer and FTB states for DSK3 and
DSK4 are therefore broadcast via the 3 and Y9 tallies. LGK-
3901 keyer and FTB states for DSK3, DSK4 and DSK5 are
therefore broadcast via the 3 and Y9 tallies.
The Squeeze Preset/Sequence Number is the current squeeze preset or
sequence number loaded. If the Squeeze is currently running (mid sequence)
the preset number will be 0xFF.
For Imagestore 2, the Squeeze modes for the standard Squeezy are:
SQ_NONE 0
SQ_PIC_IN_PIC 1
SQ_REVEAL 2
SQ_STORED 3
SQ_REVEAL_MG 4
SQ_REVEAL_FG 5
SQ_STORED_MG 6
SQ_STORED_FG 7
SQ_B_OVER_A 8
SQ_BYPASS 9
SQ_MIX 10