User manual

Automation Protocol Video Commands
Miranda Technologies Ltd Page 49
Pass SDI K
This command allows the selected input channel to pass the SDI (if present).
If no SDI is present then the colour field will be automatically substituted.
CMD Param_1
K Input Port No.
See table on page 47 for input port numbers.
Example:
void PassSDI(int Input)
{
remote_send("K%x", Input);
}
Note: For Imagestore 750, LGK-3901 and DKS-3901 black output will
be shown when no SDI signal is present. A colour field (or test
pattern) is only shown when it is explicitly routed to the input
via the XM command.