User manual

Automation Protocol Scheduled Commands
Miranda Technologies Ltd Page 256
Enable IntuitionXG Tallies V8
This enables or disables IntuitionXG tallies.
CMD Param_1
V8 %d
Enable/Disable
0 – Disable Tallies
1 – Enable Tallies
If 'V8 1' is sent to enable IntuitionXG tallies, then the tallies returned from
Xplay will differ from those returned when Y61 is used (to enable video
tallies) as follows:
• The scene event summary will report, for each keyer, the keyer state
(3), the item that is cued (Y9) and the item that is on-air (V1)
• A V1 tally will be reported when an item is taken to air
• A V2 tally will be reported when an item is cleared from air
Y60 and Y61 still work as before.
The V1 and V2 tallies have the following formats:
Format Field Description
%c%c Cmd V1
%x Keyer No. Number of the keyer that was taken
|%s Item Name of the item that was taken to air
Format Field Description
%c%c Cmd V2
%x Keyer No. Number of the keyer that was cleared