User manual

Automation Protocol Scheduled Commands
Miranda Technologies Ltd Page 254
CMD Param_1 Param_2 - Optional
V1 %s, %s, …
Keyer Numbers or Keyer
Names in Xplay,
separated by commas
|%x
Take Number
-1 – Do all takes (default)
0 – do first take
1 – do second take …
Clear V2
This causes items that are on air on IntuitionXG keyers to be cleared. The
keyers can be identified using the keyer number, or the keyer name used in
Xplay. Multiple keyers are separated by the ‘,’ character and can be cleared
using one command.
CMD Param_1
V2 %s, %s, …
Keyer Numbers or Keyer Names in
Xplay, separated by commas
Keyer Cut/Fade Up V3
This causes IntuitionXG keyers to be cut or faded up. The keyers can be
identified using the keyer number, or the keyer name used in Xplay. Multiple
keyers are separated by the ‘,’ character and can be cut/faded up using one
command. The fade rate is specified in mS, where any positive integer. A
fade rate of 0 indicates a cut.
CMD Param_1 Param_2 Param_3 - Optional
V3 %s, %s, …
Keyer Numbers or
Keyer Names in
Xplay, separated by
commas
|%x
Fade Rate
0 – Cut
Fade rate in mS
|%x
Output
0 – Preview
1 – On air
Keyer Cut/Fade Down V4
This causes IntuitionXG keyers to be cut or faded down. The keyers can be
identified using the keyer number, or the keyer name used in Xplay. Multiple
keyers are separated by the ‘,’ character and can be cut/faded down using one
command. The fade rate is specified in mS, where any positive integer. A
fade rate of 0 indicates a cut. The ‘Output’ parameter is optional.