User manual

Automation Protocol Scheduled Commands
Miranda Technologies Ltd Page 251
Time Of/Till Next Event i3
This command enquires the time of the next command, or the time until the
next command
CMD Param_1
i3 %01d: Flag
0=Timecode of next scheduled event,
1= Time until the next scheduled event
The response is:
CMD Param_1 Param_2
i1 %01d
Flag
%08d
Timecode
Scheduled commands are NOT saved therefore powering off the Imagestore
will clear the scheduled list.
If the video standard is changed, the scheduled list will be cleared.
Care must be taken when manual control of the Imagestore is undertaken as
scheduled events will continue that may no longer be required. It is
recommended that the i2 command be used to clear the scheduled list before
operating the unit manually.