User manual

Automation Protocol Easytext Commands
Miranda Technologies Ltd Page 210
Set Program Surround 90 Degree Phase-Shift
oO
This command sets the program surround channels 3dB attenuation enable:
CMD Param_1 Param_2 Param_3 Param_4
oO %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%1: 90 Degrees Phase Shift
Enable
0 – Disabled
1 – Enabled
The current program 90 degree phase shift can be enquired using:
CMD Param_1 Param_2
oO %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program Surround 3dB Attenuation oP
This command sets the program surround channel 3dB attenuation enable.
This command is used to compensate surround levels prior to encoding:
CMD Param_1 Param_2 Param_3 Param_4
oP %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%1: 3dB Attenuation Enable
0 – Disabled
1 – Enabled
The current program3dB attenuation can be enquired using:
CMD Param_1 Param_2
oP %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.