User manual

Automation Protocol Easytext Commands
Miranda Technologies Ltd Page 207
CMD Param_1 Param_2 Param_3 Param_4
oI %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%02: Dolby Surround EX
TM
mode
0 – Not indicated
1 – Not encoded
2 – Encoded
The current program Dolby Surround EX
TM
mode can be enquired using:
CMD Param_1 Param_2
oI %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program Dolby Headphone Mode oJ
This command sets whether the program has been Dolby headphone
encoded. This command is only applicable to audio coding modes of 2/0:
CMD Param_1 Param_2 Param_3 Param_4
oJ %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%02: Headphone Mode
0 – Not indicated
1 – Not encoded
2 – Encoded
The current program Dolby headphone mode can be enquired using:
CMD Param_1 Param_2
oJ %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program A/D Converter Type oK
This command sets the program Analogue to Digital (A/D) converter type
used to capture PCM audio: