User manual

Automation Protocol Easytext Commands
Miranda Technologies Ltd Page 206
The current program down-mix Lo/Ro centre mix level can be enquired
using:
CMD Param_1 Param_2
oG %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program Down-Mix Lo/Ro Surround Mix
Level oH
This command sets the program down-mix level of the surround channels
with respect to the left and right channels on a only/right only (Lo/Ro) down-
mix:
CMD Param_1 Param_2 Param_3 Param_4
o %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%02: Surround Mix Level
0 – -1.5dB 1 – -3dB
2 – -4.5dB 3 – -6dB
4 – -infinity dB
The current program down-m,ix Lo/Ro surround mix level can be enquired
using:
CMD Param_1 Param_2
oH %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program Dolby Surround EX
TM
Mode oI
This command sets whether the program has been executed in Dolby
Surround EX
TM
mode. This command is only applicable to audio coding
modes of 2/2 or 3/2: