User manual

Automation Protocol Easytext Commands
Miranda Technologies Ltd Page 198
The current program description can be enquired using:
CMD Param_1 Param_2
o1 %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.
Set Program Bitstream Mode o2
This command sets the program bitstream mode to indicate the program
service type:
CMD Param_1 Param_2 Param_3 Param_4
o2 %1x:
Bank No.
%1x:
Program
No.
%02x:
Flags
00
%02x: Bitstream mode
0 – Complete main
1 – Music and effects
2 – Visually impaired
3 – Hearing impaired
4 – Dialogue
5 – Commentary
6 – Emergency
7 – Voiceover
8 – Karaoke
The current program bitstream mode can be enquired using:
CMD Param_1 Param_2
o2 %1x: Bank
No.
%1x:
Program No.
The response is in the form of the set command.