User manual

Automation Protocol Easytext Commands
Miranda Technologies Ltd Page 195
Dolby and Up-mix Commands
Note: The Dolby and up-mix commands are applicable to Imagestore
750 v2.0 or above with the relevant Dolby or up-mix module
fitted. See the Imagestore 750 user manual for more
information.
Set Up-Mix Mode q00
This command sets the operating mode of an up-mix module.
CMD Param_1 Param_2 Param_3
q0 %1x: 0 %1x: Up-
Mix Module
No.
%1x: Mode
0 – Up-mix pass-through
1 – Up-mix on
2 – Up-mix controlled by metadata
Set Dolby E Encoder Mode q10
This command sets the operating mode of a Dolby E encoder module.
CMD Param_1 Param_2 Param_3
q1 %1x: 0 %1x: Dolby
E Encoder
Module No.
%1x: Mode
0 – Encode
1 – Pass-through
Set Dolby Digital Encoder Mode q20
This command sets the operating mode of a Dolby E encoder module.
CMD Param_1 Param_2 Param_3
q2 %1x: 0 %1x: Dolby
Digital
Encoder
Module No.
%1x: Mode
0 – Encode
1 – Pass-through