User manual

Automation Protocol Audio Commands
Miranda Technologies Ltd Page 188
Audio FX Send/Return and Data Paths
FX Send Setup j8
Sets up the audio FX send and return paths, and any gain applied to the FX
send path.
CMD Param_1 Param_2 Param_3 Param_4
j8 %1x Enable %2x: FX Send mode. %2x:
FX Return pair
%2x:
FX Send gain.
j8 0 = Disabled,
1 = Enabled
See the tables below 4 = Pair1,
6 = Pair2
dBval
For AB Mix mode, values for send mode are as follows:
FX Send mode Value
A Input Pair 1 1
A Input Pair 2 2
Voice-over 1 Pair 1 4
B Input Pair 1 8
B Input Pair 2 16
AB Mix Pair 1 9
AB Mix Pair 2 18
AB Mix Pair 1 + VO1 13
AB Mix Pair 2 + VO1 22
And for dual voice-over mode, the following values are allowed:
FX Send mode Value
BGND Pair 1 1
BGND Pair 2 2
Voice-over 1 Pair 1 4
Voice-over 2 Pair 1 8
Voice-over 2 Pair 2 16
BGND + VO1 Pair 1 5
BGND + VO2 Pair 1 13
BGND + VO2 Pair 2 29