User manual

Automation Protocol Extended Status Commands
Miranda Technologies Ltd Page 153
For example Xe20070302230010 Sets the date to be 2
nd
March 2007and the
time to be 23:00:10.
Store-Keyer Configuration Xi
Note: Changing the store-keyer configuration unloads all stores. The
store-keyer configuration cannot be changed when EAS is
active. This command is only supported on the LGK-3901.
This command sets the store-keyer configuration:
CMD Param_1
Xi %1x: Store-Keyer Configuration
The possible LGK-3901 store-keyer configurations are:
Param_1 Keyer Number Representation
1 2 3 4 5
0 Store Store Store 1S 2S 3S 4 5
1 Store Store Store 1S 2S 3 4S 5
2 Store Store Store 1S 2S 3 4 5S
3 Store Store Store 1S 2 3S 4S 5
4 Store Store Store 1S 2 3S 4 5S
5 Store Store Store 1S 2 3 4S 5S
6 Store Store Store 1 2S 3S 4S 5
7 Store Store Store 1 2S 3S 4 5S
8 Store Store Store 1 2S 3 4S 5S
9 Store Store Store 1 2 3S 4S 5S
The current store-keyer configuration can be enquired using:
CMD
Xi
Response:
Format Field Description
%c%c Cmd Xi
%1x Store-Keyer
Configuration
The current store-keyer configuration, as
indicated above