User manual

Automation Protocol Extended Status Commands
Miranda Technologies Ltd Page 148
Monitor Feed XT
This command sets the feed displayed by the monitor for an Imagestore 750:
CMD Param_1
XT %02x: Monitor Feed
Possible settings for the Imagestore 750 monitor feed are as follows:
0x00: Program (factory default)
0x01: Preview
0x02: SDI A
0x03: SDI B
0x04: SDI C
0x05: SDI D
0x06: Program AB Mixer
0x07: Preview AB Mixer
0x08: Store 1 Fill
0x09: Store 1 Key
0x0A: Store 2 Fill
0x0B: Store 2 Key
0x0C: Store 3 Fill
0x0D: Store 3 Key
0x0E: Store 4 Fill
0x0F: Store 4 Key
0x10: SDI Fill-1
0x11: SDI Key-1
0x12: SDI Fill-2
0x13: SDI Key-2
0x14: Colour 1
0x15: Colour 2
0x16: Colour 3
0x17: Colour 4 (V-Fade Colour)
0x18: Test Pattern 1
0x19: Test Pattern 2
0x1A: Program DVE 1
0x1B: Program DVE 2
0x1C: Preview DVE 1
0x1D: Preview DVE 2
0x1E: Program DVE output
0x1F: Program DSK 1 output
0x20: Program DSK 2 output
0x21: Program DSK 3 output