User manual

Automation Protocol Extended Status Commands
Miranda Technologies Ltd Page 141
CMD Param_1
XI %1x: Reference
Example:
void SetReference(int Reference)
{
remote_send(“XI%x”, Reference);
}
The command XI alternatively responds with the current reference mode.
Format Field Description
%c%c Cmd XI
%x Reference Current reference mode
For Intuition[+], the XI enquire command will return one of the following:
3: Video genlock is current standard
4: Invalid reference signal
5: Video genlock is valid but not the current standard
Clock Offset XJ
This command sets the current clock offset for the specified reference mode
as follows:
0: Analogue (REF1)
1: Analogue (REF2)
2: SDI-BGnd
3: Video genlock is current standard
CMD Param_1 Param_2
XJ %1x: Reference %06x: Clock Offset
Note: For Imagestore 750, LGK-3901 and DSK-3901 the only external
reference supported is “0”. For these products the reference is
automatically selected and cannot be set.