User manual

Automation Protocol Extended Status Commands
Miranda Technologies Ltd Page 140
0x00: Store 1 Key
0x04: Store 2 Fill
0x01: Store 2 Key
0x13: Store 3 Fill
0x14: Store 3 Key
For DSK-3901 the supported preview modes are:
0x03: Program output
0x0B: Preview output
0x02: PGM DSK 1 output
0x07: SDI Fill-1
0x08: SDI Key-1
0x0C: SDI Fill-2
0x0D: SDI Key-2
Example:
void SetPreview(int Preview)
{
remote_send(“XH%02x”, Preview);
}
The command XH alternatively responds with the current preview mode.
Format Field Description
%c%c Cmd XH
%02x Preview Current preview mode
Set Reference XI
This command sets the current video signal reference mode as follows:
0: Analogue (REF1)
1: Analogue (REF2)
2: SDI-BGnd
3: Video genlock is current standard
Note: For Intuition[+], the XI command can not be used to set the
video signal reference since this is automatically detected by the
video card.
For Imagestore 750, LGK-3901 and DSK-3901 the only external
reference supported is “0”. For these products the reference is
automatically selected and cannot be set.