User manual

Imagestore HDTV User Manual Overview
Miranda Technologies Ltd Page 43
6/Key-2
Pass SDI
Force Colour Field RGB 0 <> 100%
The factory default setting for each input is to Pass-SDI. If the input is
unused/unconnected it can be set to internally generate a colour field.
Using the front panel control keys (⊳  enter) select the input you wish to
modify. To adjust the colour field select Force Colour Field then press the
enter key.
The colour field is set by adjusting the RGB (Red, Green, Blue) values, from
0% to 100%, for each colour in turn. Using the arrow keys ⊳ , increase or
decrease the field value then, when the desired value is reached press the
enter key. After adjusting the Red value the Green field will be displayed
then the Blue. Pressing the enter key after adjusting the Blue value will
accept the change. To go back a level press escape key.
Standard Colours
Colour Red (%) Green (%) Blue (%)
White 100 100 100
Yellow 100 100 0
Cyan 0 100 100
Green 0 100 0
Magenta 100 0 100
Red 100 0 0
Blue 0 0 100
Black 0 0 0