User manual

Standard Mixfiles Imagestore HDTV User Manual
Page 256 Miranda Technologies Ltd
AES inputs are used for the A and B inputs. The output of the AB mixing is
routed to AES outputs 1-4.
7.1_IntuitionVO.mix
This mixfile is designed for 7.1 surround embedded AB mixing with a single
8 channel voice-over insertion onto embedded output. It collects audio from
the first eight channels of the A and B inputs, and mixes these to the program
output, incorporating a single 8-channel voice-over insertion. Physical inputs
for the voice-over are on AES inputs 1-4. The voice-over is specifically
tailored towards receiving audio input from an Intuition+.
7.1 Mixfile Modes
Mode 1: Standard 7.1 AB mix
In this mix mode the first 8 channels of each of the embedded inputs (or the
first 8 AES inputs) are mixed in a direct one-to-one relationship as shown on
page 253.
The four input and output bunches have been mapped to allow for
independent gain control and muting as follows…
Stereo Left & Right
Surround Left & Right
and Rear Left & Right
Centre channelCentre channel
LF channel
When using the group select command to change the active mode of this
mixfile all four inputs must be switched. Failure to do this will result in
undesired behaviour or silence. The automation commands required to set the
Imagestore to this mix mode are as follows…
PGM input: j01510: j01520: