User manual

Standard Mixfiles Imagestore HDTV User Manual
Page 250 Miranda Technologies Ltd
Note For other examples of VO2 shuffles please refer to the previous
section. The physical inputs used for this voice-over vary depending
on which mixfile variant is in use. See page 229 for more details
Following is an example of setting the shuffle for the external voice-over via
automation. First it is prudent to clear any existing (VO2) shuffles taking care
not to accidentally disable the shuffles that modify Easyplay.
jg220: jg230:
Next the default crosspoints in the matrix are set. The following commands
set the shuffle configuration shown in the previous diagram.
jg225: jg236:
6-channel External Voice-over (Intuition+)
This option allows for 5.1 surround external voice-over insertion. This is
particularly tailored towards receiving audio input from an Intuition+.
The topology for control of the 6-channel voice-over (VO1) is similar to that
used for Easyplay mixfile variants, with control possible on a per-channel
basis. Due to lack of physical inputs, there is no second external voice-over
(VO2) in this mode.
The mapping of external AES channels is shown below:
Stereo left
Stereo right
Centre
Surround left
LF channel
Clips channel 1
Clips channel 2
Clips channel 3
Clips channel 6
Clips channel 4
Clips channel 5
Surround right