User manual

Imagestore HDTV User Manual Standard Mixfiles
Miranda Technologies Ltd Page 235
When using the group select command to change the active mode of this
mixfile all four inputs must be switched. Failure to do this will result in
undesired behaviour or silence. The automation commands required to set the
Imagestore to this mix mode are as follows:
PGM input: j01512: j01522:
PST input: j03512: j03522:
The ‘jg’ automation command should now be used to set up the shuffles in
the matrix. First it is prudent to clear any existing shuffles to prevent any
undesired effects:
PGM input: jg100: jg110: jg120: jg130:
PST input: jg300: jg310: jg320: jg330:
Next the crosspoints in the matrix are set. The following commands set the
shuffle configuration for the diagram below, giving left to left, left to
surround left, right to right, and right to surround right.
PGM input: jg105: jg11a:
PST input: jg305: jg31a: