User manual

Imagestore HDTV User Manual Standard Mixfiles
Miranda Technologies Ltd Page 233
Stereo left
and right
Centre channel
Surround left
and right
LF channel
When using the group select command to change the active mode of this
mixfile all four inputs must be switched. Failure to do this will result in
undesired behaviour or silence. The automation commands required to set the
Imagestore to this mix mode are as follows:
PGM input: j01510: j01520:
PST input: j03510: j03520:
The ‘jg’ automation command should now be used to set up the default
shuffles in the matrix. Each command sets one crosspoint.
PGM input: jg101: jg112: jg124: jg138:
PST input: jg301: jg312: jg324: jg338:
Stereo left
and right
Centre channel
Surround left
and right
LF channel
Stereo left
and right
Surround left
and right
LF channel
X
X
X
X
Note: The above diagram shows the only permitted shuffle
configuration for this mix mode.