User manual

Installation Imagestore HDTV User Manual
Page 206 Miranda Technologies Ltd
Audio connections
AES IN (1:8)
The AES input port is used to connect the eight digital AES/EBU audio input
channels identified as AES_IN_1 to AES_IN_8. Each input source should be
connected to the Imagestore HDTV over two wires using balanced
(differential) signals and a grounded shield. Signal and associated pin-out
connections are given in the table on page 206.
IS2 Mode AES input connector pin-out
Pin Signal Pin Signal Comment
24 AES_IN_1 (+) 12 AES_IN_1 (-) A Input pair 1
25 GND 25 GND
10 AES_IN_2 (+) 23 AES_IN_2 (-) A Input pair 2
11 GND 11 GND
21 AES_IN_3 (+) 9 AES_IN_3 (-) VO1 Pair 1
22 GND 22 GND
7 AES_IN_4 (+) 20 AES_IN_4 (-) VO1 Pair 2
8 GND 8 GND
18 AES_IN_5 (+) 6 AES_IN_5 (-) B Input pair 1
19 GND 19 GND
4 AES_IN_6 (+) 17 AES_IN_6 (-) B Input pair 2
5 GND 5 GND
AES IN (9:16)
The second AES input port is used to connect the next eight digital
AES/EBU audio input channels.