User manual

Imagestore HDTV User Manual Intuition
Miranda Technologies Ltd Page 189
0xD 0xB
0xE 0xC
0xF 0xD
Using this method of load and control commands we can now address up to
16 keying layers, 2 in Imagestore and 14 in Intuition.
Imagestore Intuition Control
The Imagestore HDTV has to be configured to operate with an Intuition.
From the front panel select:
Setup > System Setup > Serial Comms Setup > RS232 or RS422 > Protocol
> Intuition.
The control port is used to forward selected commands to the Intuition
(@19.2k). The commands highlighted below are the ones supported.
ID: 8 Load file no. File
ID: 9 Save Image File
ID: G Set Image Position File
ID: I File save mask File
ID: O enquire image load File
ID: P Enquire File Status File
ID: R0 Load image File
ID: R1 Save Image File
ID: R2 Erase Image File
ID: 0 Fade to/from black Keyer
ID: 2 Cut to/from black Keyer
ID: 1 Fade keyer up or down Keyer
ID: 3 Cut keyer up/down Keyer
ID: 4 Set Mask Keyer
ID: 5 Mask enable/disable Keyer