User manual

Imagestore HDTV User Manual Emergency Alert System
Miranda Technologies Ltd Page 185
Emergency
EmergencyEmergency
Emergency Alert System
Alert System Alert System
Alert System
Imagestore HDTV supports the Emergency Alert System providing the
relevant EAS-HD-001 licence is installed.
Imagestore HDTV monitors its RS232 port for a serial string received from
an EAS receiver. When a message is received its priority is established and
the text is written and stored into one of the following default Easytext crawl
templates:
Priority 1 EASHigh.oxa
Priority 2 EASMed.oxa
Priority 3 EASLow.oxa
No priority EASNone.oxa
Note: The EAS message can only be displayed via a GPI or automation
command. To set the relevant GPI refer to page 199 and for
automation commands refer to the Oxtel Series Automation Protocol
manual.
EAS Receivers
The supported EAS receivers are:
• Sage ENDEC Model 1822.
• TFT EAS 911
To select an EAS model use the:
Setup>System Setup> Serial Comms Setup>RS232>Protocol, menu path.
Use the arrow keys ⊳  to select the required unit then press enter. The
system will need restarting.