User manual

Imagestore HDTV User Manual Audio Mix Files
Miranda Technologies Ltd Page 179
Note if the MixDown field is present, the InputProfile field should also
be present. Where an InputProfile is not specified a value of 0 is
used.
Example:
AddToMix B_G1_P1_R B_XP 0/2
This command line specifies that when the input source is included in the
mix it will be attenuated by 50% before being added.
Monitor Profiles
OutputMix <Destination> <MonitorType> <MonitorProfile>
As Input Profiles control the input of a mix so Monitor Profiles control the
output. By adding the MonitorType and MonitorProfile fields, the
output is only enabled when the conditions are met.
Monitor Profiles act as enables and only switch the output on when the
MonitorProfile value is correspondingly set externally via the front panel
or Automation control. MonitorType 1 corresponds to Preview,
MonitorType 2 corresponds to Meters and MonitorType 3 to Monitor. For
this reason, the Monitor Type field can optionally be specified in the mixfile
as a number or its equivalent text representation.
Text representation MonitorType value
PREVIEW 1
METERS 2
MONITOR 3
Example:
OutputMix METER_5 2 1
OutputMix METER_5 METERS 1
These two commands are equivalent. In both cases, the commands specify
that the output of the current mix should only be routed to METER_5 when
the MonitorProfile of MonitorType 2 (conventionally Meters) is set to 1.